Product Information
Magnums patented Viking handlebar internal design guarantees easy installations of complete wiring harnesses
Without taking away from the clean look of the peak, the novel design creates enough room to allow the complete wiring harness with factory vinyl covering and the terminal connections along with their respective shrink sleeve to easily pass through without chaffing
Using a unique flaring process, the burr-free internal radius creates a generous pocket of additional clearance within the troublesome peak of the handlebar
To make wiring installations even easier, Magnum preloads the bars with E-Z pull-thru plastic woven sleeving
Insert the wiring harness into the sleeving and pull through, its that simple
Manufactured with the highest quality construction, including machined control mounts (not swaged) plus burr-free internal wiring holes and electronic throttle control slots
All handlebars are 11/4in. diameter (except Warrior bars with 11/4in. center), have 1in. diameter center sections, 31/2in. on center knurling and work with standard controls, including hydraulic clutch and OE heated grips
Each handlebar is CNC-mandrel bent for an accurate fit and incorporates an aggressive look with wrist angles engineered for riding comfort
Warrior bars work with OE risers and clamps, are knurled, have the factory wiring hole location, do not require removal of the riser pin and incorporate over 30deg of adjustability for comfort
Bagger style bars are designed for the correct clearance on Batwing models
Available in 10in., 12in., 14in. and 16in. high Warrior, Bagger or Ape Hanger styles with high-luster chrome or gloss black finishes for an unsurpassed appearance
US Patent # 10,882,578
NOTE: Not for use with stock risers and handlebar clamp/gauge mount clamp on 883C/ 1200C models.
NOTE: Except for Warrior handlebars with a 11/4in. center section, all other Viking Handlebars have a 1in. diameter center section and fit 1in. risers. Models originally equipped with handlebars that have a center section diameter larger than 1in. will require changing the risers to a 1in. ID version.
