PIVOT SUSPENSION VISE
Designed to make suspension service simple and quick
Holds shocks and forks securely while you change oil, re-valve, or change seals
Pivoting head holds parts in any position, with mechanical stops every 45 degrees
Aluminum Soft Jaw Vise holds cylindrically shaped parts utilizing a 4 point grip system
Large side holds 39 mm to 69 mm diameter parts
Small side holds 14 mm to 39 mm diameter parts
Steel Frame is rigid yet has a small footprint, with 4 pre-drilled holes in the base for secure mounting to a bench
Movable fluid catch pan with mesh insert, and threaded drain bung
HOW IT WORKS ON FORKS
Soft Jaw Fork Peg holds fork slider up for removal of dust seal and seal retaining clip
Repositionable bottom slide bar holds forks compressed while bleeding air (priming cartridge) during reassembly and is an excellent platform for adding, adjusting and taking fork oil level measurements
Can be used to assist in removing compression valve assembly (use of stock front axle required)
HOW IT WORKS ON SHOCKS
Holds shock firmly around shock body, shaft or shock reservoir
Facilitates removal of piston rod and seal head
Facilitates removal of shock reservoir caps, chamber pistons or bladder
Holds shock to remove spherical bearings or needle bearings
Holds shocks for removal of shock spring
Total Reviews (0)
Write the First Review!