Feuling Reaper 465 Chain Drive Camshafts - 1343

Produce more power and torque in the riding rpm range, improving throttle response, acceleration and fuel mileage
Smooth camshaft lobe ramps are easier on valvetrain components and eliminate excessive valvetrain noise and wear
Dyno proven and track tested
Made in the U.S.A.
Produces solid bottom-end performance and substantial gains above 2800 rpm compared to the stock cams
Direct bolt-in replacement for M-Eight engines; can be used with stock valve springs, pushrods, lifters and exhaust
Will respond well when used with slip-on mufflers or a full exhaust system and a high-flow air cleaner
Use of performance valve springs is not required but may result in a quieter, smoother-running valve train
Responds well when combined with increased engine bore and/or engine compression
NOTE: Due to the unstable nature of this 4-valve engine design with one rocker arm activating two valve springs, Feuling highly recommends running one-piece pushrods over quick-install adjustable pushrods to maintain maximum cam/ valve lift and reduce valvetrain harmonics and associated hydraulic lifter issues.
NOTE: Feuling fastener kit PART #2401-0994 also highly recommended to help prevent cylinder head cracking; kit replaces the rocker shaft bolts with studs and nuts to help reduce the stress of the rocker shaft standoffs.